Bumper cap decal (set of 3)

Description

Set of 3 clear bumper cap decals (no bumper cap included). Installation recommendations; Remove the old decal from your bumper can and clear (or just buy new ones) Spray a light even coat of soapy water on the bumper cap. Adjust the decal until properly position. Press water from the centre out until all bubbles and liquid are gone. Let dry for 5-10 minutes before handling. This will restult in a crystal-clear, bubble free application. Manufacturer suggests 1 pump of liquid hand soap to a 10oz glass of water for a solution. Slowly “roll” the decal off the backing slightly on one edge, press the decal down onto the cap from the top side and pull rest of backing off. DO NOT touch the sticky side of the decal with your finger! You will leave a fingerprint on the adhesive that will show through once adhered to the cap.